Our RO-50MP pumped 4-stage RO system is a new type of aquarium filter. Water after it has been passed through an RO system has a reduced pH*. It is an excellent source to prepare appropriate conditions for aquatic organisms.
This system is equipped with two pre-filtration stages. The first is a sediment cartridge made from spun polyester. It effectively reduces and removes sediments including sand, silt, dirt, rust, etc. The second is an extruded carbon block cartridge made from high-quality coconut shell activated carbon, which is designed to reduce and remove chlorine and volatile organic compounds.
The main filtration takes place on RO membrane, which reduces and removes 96-99% of all impurities from water. Waste water is poured into the drain.
The final 'polishing' stage is provided via mixed-bed ion-exchange resin. It consists of a carefully blended mixture of virgin raw materials, strong acid cation and strong base anion resins. It is widely recommended for all non-regenerable mixed-bed applications where reliable production of the highest quality water is required, and where the resin must have an absolute minimum of ionic and non-ionic contamination before it is used. Any pre-contamination in the resin will reduce its overall lifespan, so a high quality resin will last longer.
This unit comes complete with colour-change MB-115 resin which turns from green to yellow when it has expired, meaning you have a visual indicator of when your resin will need replacing. Ordinary resin usually requires to be checked with a TDS meter, however colour-change resin means you can tell at a glance when it is time to renew the resin.
This system has a factory-fitted electric pump supporting the input water pressure. Raising the water pressure in the system maximizes the efficiency of the osmotic membrane and thus ensures good performance from the RO system. If your water pressure is less than 2.8 bar then a system with a pump is highly recommended. The pump supplied with this system is very effective and has been designed for many years of efficient service. Moreover the pump is very quiet. You have to listen closely to know if it is working.
Our aquarium filter is factory tested and ready to use with connection hardware, tubing and instruction manual, all of which is designed to make installation and maintenance quick and easy without the need for a plumber.
It is offered as a complete set with filter cartridges, RO membrane, DI resin, additional accessories and valves to prevent the membrane from becoming dried out.
*pH of water after RO system depends on source water.
- System dimensions (H x W x D): 370 x 472 x 170 (mm)
- Working Temp.: 5°C - 40°C (41ºF - 104ºF)
- Operating Pressure: 2.8 bar (40 psi) - 6.0 bar (90 psi) If your incoming water pressure is above 4 bar a pressure regulator should be installed.
- Inlet feed water connector: 1/4”
- Flow rate: 50 gallons-per-day
- Typical Rejection Rate: 98% TDS (Total Dissolved Solids)
- TDS (Total Dissolved Solids) < 1800 ppm
- pH Parameters: 2 – 11
- Iron: 0.2 ppm maximum
- Turbidity < 5 NTU
- Flow: 0.6 l/min
- Model: TYP-2500
- Max. inlet pressure: 25 psi
- Max. outlet pressure: 80.0 psi
- Dimensions (H x W x L): 25cm x 7cm x 7cm
- Working Current: 0.65A
- Power: 24V/DC
- Transformer Ampage: 2A
Recommendations for Use:
- Point-of-Use (POU) systems will reduce all unwanted contaminants that find their way into ground water supplies, directly affecting the quality of commercial and domestic mains water.
- Recommended especially for use with hydroponics and sensitive aquatic organisms requiring water that has been purged of dissolved solids and other particulate matter found in untreated water.
- Ideal also for household use, perfect for small families, kitchen compact and will easily fit into any under counter space
Complete Package Contains:
- The RO-50MP is supplied with the following cartridges: PP, CTO
- TYP-2500 50GPD pump
- FDA approved water filter housings (including o'rings)
- Feed water connector (can be fitted to copper mains water pipe)
- RO membrane element type: RO-1812-50 thin film composite
- Drain saddle valve, spanners for filter and RO housings
- 10" transparent housing for DI resin chamber
- 630ML litre MB-115 mixed-bed colour-change DI resin
- 1/4" tubing for system connection (5 metres)
- 300cc flow restrictor, automatic and manual flush switch
- Automatic shut-off valve
- Instructions manual
STAGE, PART#, COMPONENT, FUNCTION:
- PP - 10" sediment cartridge (pre-filter) melt-blown polypropylene. 5 micron sediment filter traps dirt, sediment, rust and other particulate matter.
- CTO - 10" coconut shell carbon cartridge (pre-filter). Activated carbon block filter is used to reduce chlorine, colour, taste, odour and other organic impurities.
- 50GPD Membrane - Thin film composite reverse osmosis membrane (50 GPD - US Gallons), 0.0001 micron. Semi-permeable membrane reduces salts, minerals, metals, bacteria, viruses, cysts, TDS, hardness, fluoride, pesticides, lead, mercury, cadmium, arsenic and more. Due to the time needed to remove all these ingredients we strongly recommend purchasing a water storage tank with your RO system.
- MB-115 Colour Change Resin - Mixture of cation and anion de-ionisation resin combined in a 40/60 blend. Mixed-bed demineralizer is used for final water polishing to clean the last few ions within water prior to use. A single pass through a mixed-bed ion-exchange column results in the purest water that can possibly be made.
Important: Do not use with water that is micro-biologically unsafe or of unknown quality without adequate disinfection before or after the system. Water filtration systems can help reduce the presence of contaminants. In addition, some water filtration systems can help reduce the presence of micro-organisms or other contaminants that pose potential health risks. Regularly scheduled maintenance and replacement of the filter cartridges is recommended in order for the product to perform as specified.
As with all RO diaphragm pumps they are not designed for 24/7 operation and you need to rest the pump for 30 minutes every 4 hours. This can be achieved using a low cost plug-in timer.
Arrive Alive Guarantee Policy:
We have close to a 99% success rate on our livestock shipping due to our picking and packing techniques.
However, the unfortunate event that an item is dead on arrival you must follow the below procedure to prevent your claim from being declined.
- You must make contact with us via email within 2 hours of receiving your order. You do not need to call us as we are not always able to answer the phone immediately due to the nature of our work with our hands in water majority of the day.
- The email must contain a clear photo of the livestock in the original bag still sealed. The photo must be clear and show the entire bag.
This allows us to review your claim and refund accordingly. Due to the nature of your purchase, should you not make contact within 2 hours, refund claims will not be considered.
Once your claim has been processed a credit will be honoured for the cost of the item EXCLUDING the cost of postage within 72 hours.
A preferred delivery date is required for all livestock orders when ordering online but in the unlikely event that delays with couriers happen therefore we would ask all customers to be flexible with the delivery date and work with us to still take in the delivery. Courier delays wont affect your DOA Credit and you will still be entitled to have a credit minus postage costs should anything arrive DOA.
All animals that we import can take 3 to 4 days to arrive with us from abroad so a 24 to 48 hour travel time with us shouldnt be an issue
Please note that the acclimatisation process and how the livestock settle into your aquarium is your responsibility as this is out of our hands. There are a number of factors out of our control such as
- Existing fish becoming aggressive towards your new additions
- Incorrect water parameters - PH / Ammonia / Nitrite Levels.
- Incorrect acclimatisation process carried out, introduced livestock too soon which will cause too much stress to the livestock.
Therefore we are unable to cover the livestock once they have been delivered and introduced into your aquarium.
Claims will NOT be considered if you miss delivery and your order is taken to the sorting office. Returns are not accepted on livestock.
DX offer a 'Change Your Delivery Date' HOWEVER, YOU MUST NOT CHANGE THE DELIVERY DATE OF YOUR LIVESTOCK ORDER. IF YOU DO YOU WILL VOID YOUR ARRIVE ALIVE GUARANTEE COMPLETELY AND NO CLAIM WILL BE CONSIDERED.
We strongly recommend that you quarantine any new additions before introducing to your main tank. As with any livestock, we cannot be 100% sure of their condition once they leave us, therefore you should always carry out your own quarantine process and monitor the livestock closely before you make the decision to introduce the livestock to your main aquarium.
As of the 1st May 2021, we will be issuing a credit code rather than a monetary refund, should a livestock item not arrive alive. You must still follow the procedure as normal which is stated in our policy, for your claim to be considered.
The credit code will be issued via email to the email address given on your order.
The credit code will be for the value of the livestock only (excluding postage costs)
This only applies if your item is covered by our Arrive Alive Guarantee policy.
The reason we have made this change is because our livestock prices are one of the cheapest across the industry and we want it to stay this way. We do not have any cover or insurance if an animal does not survive the journey to you, so in order for us to maintain our low prices we will now be offering credit notes instead of cash refunds.
If an item is out of stock at the item of packaging your order, we will issue a refund as we were unable to fulfil the item prior to dispatching.
***Credit notes issued are valid for a full 12 months from the point of issue. Credit notes cannot be exchanged for money or a refund,
Tank mate compatibility is crucial to a successful and healthy home aquarium. Incompatible species will increase stress in the tank which could result in disease and considerable loss. Use our compatibility charts as a guideline when selecting fish.
Remember, no guarantees can be made about the compatibility or incompatibility of any particular species of fish. Also, particular species within a group of fish vary in temperament and may not correspond with the guidelines below.
Proper acclimation is the key to successful introduction of new aquarium arrivals. The Floating Method is undoubtedly the most widely practiced method among hobbyists. However, a more exact method of acclimation provided by the Drip Method is required for fish, corals or invertebrates sensitive to sudden changes in water chemistry.
The reason why acclimation is necessary is simple: the chemical makeup of the water in which the aquatic life is packaged is different from your aquarium water chemistry (i.e. water temperature, pH, and salinity). Aquatic life such as fish, and especially invertebrates (including corals), are very sensitive to even minor changes in water chemistry. The goal of acclimation is to gradually introduce your new aquatic life to the water chemistry found in your aquarium at a controlled rate to avoid distress.
The acclimation process is complete when equilibrium is reached, where the temporary container housing new arrivals shares the same water chemistry as your aquarium, and your new arrival appears adjusted to these conditions. Since different species have varying levels of tolerance, different methodologies are required to control the rate of change experienced during the acclimation process.
We recommends employing the Floating Method or the Drift Method of acclimation. The Floating Method of acclimation, where aquarium water is added to the floating bag in 1/2 cup increments, is a great choice when acclimating most types of aquarium fish. However, for more sensitive fish, invertebrates, and corals, it is recommended to employ the Drip Method of acclimation. Keep in mind, no matter which acclimation method you choose, be sure to take your time and never rush the process.
The Drip Method is considered more advanced. It is geared toward sensitive aquatic life such as snails, corals, shrimp, sea stars and wrasses. You'll need a drip acclimation kit (sold separately) and must be willing to monitor the entire process. Gather a clean, 3- or 5-gallon bucket designated for aquarium use only. If acclimating both fish and invertebrates, use a separate bucket for each.
- Be patient – never rush the acclimation procedure. The total acclimation time for your new arrival should take no longer than two hours.
- Always follow the acclimation procedure even if your new arrival appears to be dead. Some fish and invertebrates can appear dead when they arrive and will usually revive when the acclimation procedure is followed correctly.
- Never place an airstone into the shipping bag or bucket when acclimating your new arrival. This will increase the pH of the shipping water too quickly and expose your new arrival to lethal ammonia.
- Keep aquarium lights off for at least four hours after the new arrival is introduced into the aquarium.
- Most invertebrates and marine plants are more sensitive than fish to changes in specific gravity. Please acclimate invertebrates to a specific gravity of 1.023-1.025 or severe stress or trauma may result.
- Some live corals produce excess slime when shipped. After the acclimation procedure is followed, hold the coral by the rock or skeletal base and gently shake the coral in the shipping bag before placing into the aquarium. To avoid damage, please remember never to touch the "fleshy" part of a live coral. Many species of coral will not open for several days after introduction into their new home.
In some instances, a new tank mate will be chased and harassed by one or all of your existing tank mates.
Solution 1: A clean plastic spaghetti strainer (found at a local store) can be used to contain a tank bully within the aquarium for several hours until the new arrival adjusts to its surroundings. Just float the perforated plastic basket in the aquarium. Net the tank bully and place in the floating basket for approximately four hours while the new arrival adjusts to your aquarium. Never place the new arrival in this basket; the new specimen must get familiar with your aquarium. By placing the tank bully in a perforated basket, you’ll reduce the stress on the new arrival.
Solution 2: A perforated plastic lighting grid can be purchased at the local hardware store to cut down the width of your aquarium. This grid may be used to section off a small portion of the aquarium to separate territorial or aggressive fish from the newest tank mate.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.